|
Grootte: 2420
Commentaar:
|
Grootte: 2520
Commentaar:
|
| Verwijderingen worden op deze manier gemarkeerd. | Toevoegingen worden op deze manier gemarkeerd. |
| Regel 16: | Regel 16: |
| That gives you the creeps, right? Danger and alarm bells! Well it is simply bullshit introduced by Autodesk to try to scare you away from using competing products that sometimes even make better dwg files than AutoCAD. It is simply {{http://en.wikipedia.org/wiki/Fear,_uncertainty_and_doubt|FUD}}. | That gives you the creeps, right? Danger and alarm bells! Well it is simply bullshit introduced by Autodesk to try to scare you away from using competing products that sometimes even make better dwg files than AutoCAD. It is simply [[http://en.wikipedia.org/wiki/Fear,_uncertainty_and_doubt|FUD]]. |
| Regel 23: | Regel 23: |
| * WBLOCK the entire drawing, forcing it to write a new Autodesk header. | * WBLOCK the entire drawing, forcing it to write a new Autodesk header. This is similar to copy and paste with base-point in a new drawing. |
| Regel 25: | Regel 25: |
| * Open and save in "TrueDwg Viewer" using DWGCONVERT to batch multiple drawings. * More suggestions for BricsCAD can be found {{http://www.bricsys.com/common/support/forumthread.jsp?id=19279|here}}. |
* Open and save in "[[http://www.autodesk.com/dwg|TrueDwg Viewer]]" using DWGCONVERT to batch multiple drawings. * More suggestions for BricsCAD can be found [[http://www.bricsys.com/common/support/forumthread.jsp?id=19279|here]]. |
Problems with drawings
Drawing in .DWG format from AutoCAD, BricsCAD, etcetera can become a source of misery, ending up with stability issues and viral contamination of your drawing collection. This part describes solutions for different problems.
Get rid of Educational plotstamps
It can happen to anyone, a drawing made with a normal version is accidentally saved in an educational version and you're stuck with a plot stamp forever. Right now there are some solutions:
- Be careful with saving when you are using an educational version of AutoCAD, keep these drawings outside the non educational environment.
- Faulty drawing: DXFOUT, new proper drawing, DXFIN or...
- New drawing, attach educational drawing as xref, bind and explode.
- In version 2015 there seems to be a built in option to import educational drawings.
Get rid of Autodesk FUD warnings
You may have seen warnings in AutoCAD saying this:
Non Autodesk DWG. This DWG file was saved by a software application that was not developed or licensed by Autodesk. Autodesk cannot guarantee the application compatibility or integrity of this file.
That gives you the creeps, right? Danger and alarm bells! Well it is simply bullshit introduced by Autodesk to try to scare you away from using competing products that sometimes even make better dwg files than AutoCAD. It is simply FUD.
Having said this you should understand that the warning comes from a header in a dwg file that determines if the drawing is from Autodesk or another vendor and there are some things you can do about it. Some solutions:
- Just ignore the warning that makes Autodesk ridiculous.
- You may want to set DWGCHECK to 0. This disables the message. It is one time registry setting.
- You may want to save the drawing if you're using a recent AutoCAD version in order to make it an Autodesk drawing. Please test this by opening the drawing again.
There are also some more in depth solutions:
- WBLOCK the entire drawing, forcing it to write a new Autodesk header. This is similar to copy and paste with base-point in a new drawing.
- BricsCAD users can save as dwt, opening in AutoCAD goes without warning.
Open and save in "TrueDwg Viewer" using DWGCONVERT to batch multiple drawings.
More suggestions for BricsCAD can be found here.